TROOP SEAT CENTER MOUNTED KIT REPLACEMENT - continued

TM 9-2320-361-24-2

0395 00

TROOP SEAT CENTER MOUNTED KIT REPLACEMENT (Contd)

REMOVAL

Remove five cotter pins (5) and pins (3) from hinges of troop seat (1) and side rack (2). Discard

cotter pins (5).

Rotate two latches (4) and remove troop seat (1) from side rack (2).

Remove side rack (2) from pockets (6), (7), (8), (11), and (21).

NOTE

Assistant will help with steps 4 through 6.

Remove eight locknuts (19), washers (20), screws (23), washers (22), and pockets (6) and (21) from

cargo body floor (15). Discard locknuts (19).

Remove four locknuts (17), washers (18), two reinforcements (16), four screws (24), washers (25),

and pocket (11) from cargo body floor (15). Discard locknuts (17).

Remove eight locknuts (14), washers (13), two reinforcements (12), eight screws (9), washers (10),

and pockets (7) and (8) from cargo body floor (15). Discard locknuts (14).

INSTALLATION

NOTE

Assistant will help with steps 1 through 5.

Position pockets (7) and (8) on cargo body floor (15) with eight washers (10) and screws (9).

Install two reinforcements (12) on eight screws (9) with eight washers (13) and new locknuts (14).

Position pocket (11) on cargo body floor (15) with four washers (25) and screws (24).

Place two reinforcements (16) on four screws (24) and install with four washers (18) and new

locknuts (17).

Position pockets (6) and (21) on cargo body floor (15) with eight washers (22) and screws (23).

Install with eight washers (20) and new locknuts (19).

Install side rack (2) in pockets (6), (7), (8), (11), and (21).

Install troop seat (1) on side rack (2) with five pins (3) and new cotter pins (5).

Raise troop seat (1) in stow position and hold in place with two latches (4).

Connect battery ground cable (WP 0126 00).

10.

Release parking brake and remove wheel chocks (TM 9-2320-361-10).

0395 00-2