 |
|||
|
|
|||
|
Page Title:
MACHINE GUN MOUNT KIT REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0389 00
MACHINE GUN MOUNT KIT REPLACEMENT (Contd)
INSTALLATION
NOTE
Assistant will help with steps 2 through 8.
If machine gun mount kit is not to be installed, proceed to cab
top installation.
1.
Install four U-bolts (8) on two rear gun mount brackets (7) with eight new locknuts (3). Finger
tighten locknuts (3).
2.
Install right rear bracket post (1) through U-bolts (8) and rear gun mount bracket (7). Ensure
pin (2) rests on top of U-bolt (8) and bracket post (1) turns freely.
3.
Install left rear bracket post (9) through U-bolts (8) and rear gun mount bracket (7). Ensure weld
post pin (10) rests on top of U-bolt (8) and bracket post (9) turns freely.
4.
Loosen four screws (11) on front gun mount bracket (6).
5.
Install front bracket post (4) in front gun mount bracket (6). Ensure pin (5) rests on top of gun
mount bracket (6).
6.
Position ring mount (12) on front bracket post (4), right rear bracket post (1), and left rear bracket
post adapter (15).
7.
Align ring mount locating hole (18) to locating hole in right rear adapter (17).
8.
Install ring mount (12) with twelve screws (13), twenty-four washers (14), and twelve new
locknuts (16).
9.
Tighten all four right front gun mount screws (11).
10.
Tighten all remaining gun mount hardware.
11.
Install cab top, hardtop (WP 0363 00), or soft top (TM 9-2320-361-10).
12.
Connect battery ground cable (WP 0126 00).
13.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0389 00-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version