MACHINE GUN MOUNT KIT REPLACEMENT - continued

TM 9-2320-361-24-2

0389 00

MACHINE GUN MOUNT KIT REPLACEMENT (Contd)

REMOVAL

NOTE

Clamp down latch on ring mount to prevent rotation during

removal.

Remove twelve locknuts (5), screws (2), and twenty-four washers (3) from ring mount (1),

adapter (4), front bracket post (6), and rear bracket posts (7) and (8). Discard locknuts (5).

NOTE

Assistant will help with steps 2 through 4.

Remove ring mount (1) from front bracket post (6), rear bracket posts (7) and (8), and adapter (4).

Loosen four screws (13) and remove front bracket post (6) from front gun mount bracket (11).

Retighten four screws (13).

WARNING

Bracket posts must be held in position before removing U-bolts.

Failure to do so may cause injury to personnel.

Remove eight locknuts (10), four U-bolts (9) and two rear bracket posts (7) and (8) from two rear

gun mount brackets (12). Discard locknuts (10).

0389 00-2