 |
|||
|
|
|||
|
Page Title:
DEEP WATER FORDING KIT REGULATOR VALVE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0387 00
DEEP WATER FORDING KIT REGULATOR VALVE REPLACEMENT (Contd)
REMOVAL
WARNING
Do not disconnect air lines before draining air reservoirs. Small
parts under pressure may shoot out with high velocity, causing
injury to personnel.
1.
Remove hose (5) from elbow (4) on engine compartment firewall (1).
2.
Remove tube (8) from regulator valve (7).
3.
Remove regulator valve (7) from coupling (6).
4.
Remove elbow (4), nut (3), lockwasher (2), coupling (6) from firewall (1). Discard lockwasher (2).
INSTALLATION
NOTE
Wrap male pipe threads with antiseize tape prior to
installation.
1.
Install coupling (6) and elbow (4) on firewall (1) with new lockwasher (2) and nut (3).
2.
Install regulator valve (7) on coupling (6).
3.
Install tube (8) on regulator valve (7).
4.
Install hose (5) on elbow (4).
5.
Start engine (TM 9-2320-361-10) and allow air pressure to build up to normal operating range;
check for air leaks.
6.
Connect battery ground cable (WP 0126 00).
7.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
3
1
2
4
5
6
7
8
END OF WORK PACKAGE
0387 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version