 |
|||
|
|
|||
|
Page Title:
SECONDARY HEATER AND DUCT REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0384 00
SECONDARY HEATER AND DUCT REPLACEMENT (Contd)
HEATER, EXHAUST TUBE, AND GUARD INSTALLATION
1.
Install bracket (13) on van wall (37) with clamp (16), three washers (38), four new
lockwashers (17), and screws (18).
2.
Install support (26) on bracket (13) with two washers (38), new lockwashers (17), screws (18),
washers (38), new lockwashers (17), and screws (39).
3.
Install new gasket (27) and exhaust tube (28) on support (26) with four screws (28).
4.
Install new gasket (36) and tube adapter (35) on van wall (37) with three lockwashers (32) and
screws (33).
5.
Install exhaust tube (29) on tube adapter (35) with clamp (34).
6.
Install guard (30) on exhaust tube (29), support (26), and tube adapter (35) with washer (31), new
lockwasher (32), and two screws (28) and (33).
7.
Install new O-ring (24), washer (23), and heater (15) on support (26) with two clamps (14).
8.
Install adapter (20) on heater (15) with eight screws (21).
9.
Install duct (25) on adapter (20) with clamp (22).
10.
Install heater harness (19) on heater (15).
11.
Connect battery ground cable (WP 0126 00).
12.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
16
19
17 18
13
15
20
21
14
23
22
24
37
18
25
~
38 17
14
38
26
17
18
27
38
32
17 39
28
33
29
34
28
30
36
35
31 32
33
END OF WORK PACKAGE
0384 00-5/6 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version