 |
|||
|
|
|||
|
Page Title:
SECONDARY HEATER AND DUCT REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0384 00
SECONDARY HEATER AND DUCT REPLACEMENT (Contd)
HEATER, EXHAUST TUBE, AND GUARD REMOVAL
1.
Disconnect heater harness (7) from heater (3).
2.
Remove clamp (10) and duct (13) from adapter (8).
3.
Remove eight screws (9) and adapter (8) from heater (3).
4.
Remove two clamps (2), heater (3), washer (11), and O-ring (12) from support (14). Discard
O-ring (12).
5.
Remove screws (16) and (22), lockwasher (23), washer (24), and guard (21) from exhaust tube (20),
tube adapter (27), and support (14). Discard lockwasher (23).
6.
Remove clamp (26) from exhaust tube (20) and tube adapter (27).
7.
Remove three screws (22), lockwashers (23), tube adapter (27), and gasket (28) from van wall (29).
Discard lockwashers (23) and gasket (28).
8.
Remove four screws (16), gasket (15), and exhaust tube (20) from support (14). Discard
gasket (15).
9.
Remove two screws (6), lockwashers (25), washers (5), two screws (17), lockwashers (18),
washers (19), and support (14) from bracket (1). Discard lockwashers (18) and (25).
10.
Remove four screws (6), lockwashers (25), three flat washers (5), clamp (4), and bracket (1) from
van wall (29). Discard lockwashers (25).
0384 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version