 |
|||
|
|
|||
|
Page Title:
PRIMARY HEATER AND DUCT REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0380 00
PRIMARY HEATER AND DUCT REPLACEMENT (Contd)
HEATER INSTALLATION
1.
Install support (22) on van wall (13) with four screws (21).
2.
Install exhaust tube (25) and new gasket (23) on van wall (13) with four screws (24).
3.
Install exhaust tube (25) and new gasket (27) on support (22) with four screws (26).
4.
Install guard (28) on van wall (13) with two screws (30).
5.
Install guard (28) on support (22) with screw (29).
6.
Install new O-ring (34), washer (35), and heater (16) on support (22) with two clamps (32).
7.
Install cover (14) on heater box (31) with three screws (15).
8.
Install adapter (17) on heater (16) with four screws (33).
9.
Install duct (19) on adapter (17) with clamp (18).
10.
Install heater harness (20) on heater (16).
11.
Check heater for proper operation (TM 9-2320-361-10).
12.
Connect battery ground cable (WP 0126 00).
13.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
16
15
17
20
18
14
32
33
35
19
32
34
31
13
21
30
22
27
23
29
26
24
28
25
END OF WORK PACKAGE
0380 00-5/6 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version