HARDTOP MAINTENANCE

TM 9-2320-361-24-2

0363 00

HARDTOP MAINTENANCE (Contd)

WARNING

Hardtop is heavy. An assistant is required during removal and

installation to prevent injury to personnel.

REMOVAL

Remove two screws (1) and lockwashers (2) from each side of hardtop (3) and windshield frame (14).

Discard lockwashers (2).

Remove capscrew (12), washer (13), and locknut (5) from each side of hardtop (3) and windshield

frame (14). Discard locknut (5).

Remove fourteen screws (11), locknuts (6), and washers (7) and (10) from hardtop (3). Discard

locknuts (6).

NOTE

Assistant will help with step 4.

Remove hardtop (3) and seal (8).

Remove two screws (23) and retainers (22) from back panel (9).

Remove fourteen locknuts (24), screws (19), and washers (20) from back panel (9) and cab (18).

Discard locknuts (24).

Remove back panel (9) and seal (21) from cab (18).

DISASSEMBLY

Remove five nuts (4), lockwashers (16), screws (15), and seal (17) from hardtop (3). Discard

lockwashers (16).

INSPECTION

Inspect seals (8), (17), and (21) for rips, tears, or other damage. Replace seals (8) and (21) if ripped,

torn, or damaged.

ASSEMBLY

Install seal (17) on hardtop (3) with five screws (15), new lockwashers (16), and nuts (4).

INSTALLATION

NOTE

Do not tighten any screws or nuts until kit is fully installed.

Install seal (21) to back panel (9) with two retainers (22) and screws (23).

Install back panel (9) to cab (18) and align holes.

Install fourteen washers (20), screws (19), and new locknuts (24) on back panel (9) and cab (18).

NOTE

Assistant will help with step 4.

Place seal (8) on back panel (9). Install hardtop (3) on back panel (9) and align holes.

Install fourteen washers (7), screws (11), washers (10), and new locknuts (6) on back panel (9) and

hardtop (3). Do not tighten.

Install washer (13), capscrew (12), and new locknut (5) on each side of hardtop (3) and windshield

frame (14).

0363 00-2