 |
|||
|
|
|||
|
Page Title:
PERSONNEL HEATER FUEL PUMP REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0353 00
PERSONNEL HEATER FUEL PUMP REPLACEMENT (Contd)
WARNING
Diesel fuel is flammable. Do not perform fuel system procedures
near open flames. Injury or death to may result.
REMOVAL
1.
Disconnect wire (6) from wire (5).
CAUTION
Cap or plug all hoses, connections, and openings immediately
after disconnection to prevent contamination. Failure to do so
may result in damage to equipment.
2.
Disconnect inlet line (3) from fuel pump (11).
3.
Disconnect outlet line (1) from elbow (2).
4.
Remove elbow (2) from fuel pump (11).
5.
Remove two screws (7), lockwashers (8), clamp (10), ground wire (9), and fuel pump (11) from
plate (4). Discard lockwashers (8).
INSTALLATION
CAUTION
Remove caps or plugs from hoses, connections, and openings
before reconnection. Failure to do so may result in damage to
equipment.
1.
Install fuel pump (11), ground wire (9), and clamp (10) on plate (4) with two new lockwashers (8)
and screws (7).
2.
Install elbow (2) on fuel pump (11).
3.
Connect outlet line (1) to elbow (2).
4.
Connect inlet line (3) to fuel pump (11).
5.
Connect wire (6) to wire (5).
6.
Connect battery ground cable (WP 0126 00).
7.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
3
1
11
2
4
10
~
9
8
7
5
6
END OF WORK PACKAGE
0353 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version