 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-361-24-2
FIELD MAINTENANCE INSTRUCTIONS
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)
DOOR CHECK REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Applicable Models
Equipment Condition
M185A3, M109A3
Parking brake set and wheels chocked
(TM 9-2320-361-10).
Materials/Parts
Battery ground cable disconnected
(WP 0126 00).
Two locknuts (item 145, WP 0470 00)
Adhesive (item 5, WP 0468 00)
NOTE
Left and right door checks are removed and installed the same.
This procedure covers the right door check.
REMOVAL
1.
Pull back door seal (3) from door channel (5).
2.
Remove two locknuts (7), screws (6), and door check (1) from door channel (5). Discard locknuts (7).
3.
Remove two screws (2) and door check (1) from van door (4).
INSTALLATION
1.
Install door check (1) on van door (4) with two screws (2).
2.
Install door check (1) on door channel (5) with two new locknuts (7) and screws (6).
3.
Apply adhesive to door channel (5) and place door seal (3) on door channel (5).
4.
Connect battery ground cable (WP 0126 00).
5.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
2
3
4
1
5
6
7
END OF WORK PACKAGE
0336 00-1/2 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version