 |
|||
|
|
|||
|
Page Title:
EXHAUST BLOWER SWITCH REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0327 00
EXHAUST BLOWER SWITCH REPLACEMENT (Contd)
REMOVAL
1.
Remove fourteen screws (13) from converter front panel (3) and converter (6).
2.
Turn screw (9) and open door (10). Pull converter front panel (3) away from converter (6).
3.
Remove two screws (1), exhaust blower switch (4), and identification plate (2) from converter front
panel (3).
NOTE
Prior to removal, tag all lead wires for installation.
4.
Remove three screws (8), lockwashers (7), resistor (5), and two wires (11) and (12) from exhaust
blower switch (4). Discard lockwashers (7).
INSTALLATION
1.
Install wire (12) on exhaust blower switch (4) with new lockwasher (7) and screw (8).
2.
Install resistor (5) and wire (11) on exhaust blower switch (4) with two new lockwashers (7) and
screws (8).
3.
Install exhaust blower switch (4) and identification plate (2) on converter front panel (3) with two
screws (1).
4.
Install converter front panel (3) on converter (6) with fourteen screws (13).
5.
Close door (10) and turn screw (9).
6.
Install converter (WP 0328 00).
7.
Connect battery ground cable (WP 0126 00).
8.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
1
3
2
6
4
7
5
8
7
7
8
9
10
11
12
13
END OF WORK PACKAGE
0327 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version