 |
|||
|
|
|||
|
Page Title:
VAN BODY ACCESS DOOR REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0322 00
VAN BODY ACCESS DOOR REPLACEMENT (Contd)
REMOVAL
1.
Open access door (2).
2.
Drill plug (5) and rivet (4) out of van wall (1) and chain (3). Discard plug (5) and rivet (4).
3.
Unfasten two hinges (6) from two latch locks (9).
4.
Remove access door (2) from van wall (1).
5.
Drill out four plugs (7) and rivets (8) from van wall (1) and latch locks (9). Discard plugs (7) and
rivets (8).
6.
Remove two latch locks (9) and spacers (10) from van wall (1).
7.
Remove screw (11), handle (12), and washer (13) from access door (2).
INSTALLATION
1.
Install washer (13) and handle (12) on access door (2) with screw (11).
2.
Install two spacers (10) and latch locks (9) on van wall (1) with four new rivets (8) and new
plugs (7).
3.
Position access door (2) on van wall (1).
4.
Fasten two hinges (6) on two latch locks (9).
5.
Install new rivet (4) and new plug (5) through chain (3) and on van wall (1).
6.
Close access door (2).
7.
Connect battery ground cable (WP 0126 00).
8.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0322 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version