 |
|||
|
|
|||
|
Page Title:
VAN DOOR MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0305 00
VAN DOOR MAINTENANCE (Contd)
RIGHT VAN DOOR ASSEMBLY
1.
Install padlock (21) on van door (1) with screw (22).
2.
Install spacer (20) and outside door handle (19) on van door (1) with three screws (17) and new
lockwashers (18).
3.
Install holder (16) on van door (1) with two screws (15).
4.
Install upper and lower rods (11) and (3) on lock (5) with two new cotter pins (4) and (12).
5.
Install rods (3) and (11) on two guides (8) with two screws (10).
6.
Install lock (5) on van door (1) with four screws (7) and new lockwashers (6).
7.
Install inside door handle (13) on van door (1) with new cotter pin (14).
8.
Install four spacers (2) and two guides (8) on van door (1) with eight screws (9).
LEFT VAN DOOR ASSEMBLY
1.
Install holder (37) on van door (26) with two screws (36).
2.
Install lock (25) and rod (35) on van door (26) with four screws (23) and new lockwashers (24).
3.
Install guide (34) on van door (26) with two new screw-assembled lockwashers (33).
4.
Install plate (32) on van door (26) with two screws (30) and new lockwashers (31).
5.
Install latch (27) on van door (26) with four screws (28) and new lockwashers (29).
6.
Install van doors (WP 0303 00).
7.
Connect battery ground cable (WP 0126 00).
8.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
LEFT SIDE
2
16
37
26
15
1
36
25
8
24
9
23
~
3
10
4
19 20
14
18
35
13
17
12
34
21
33
22
5
6
30 31 32
11
7
10
29
28
RIGHT SIDE
2
27
8
9
END OF WORK PACKAGE
0305 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version