 |
|||
|
|
|||
|
Page Title:
VAN DOOR SEALS REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0304 00
VAN DOOR SEALS REPLACEMENT (Contd)
NOTE
Secure van doors in open position.
REMOVAL
1.
Remove four seals (2) from bottom, top, and side channels (3). Discard seals (2).
2.
Remove seal (5) from channel (4) on left van door (1). Discard seals (5).
CLEANING
WARNING
Skysol 100 solvent is combustible; DO NOT use or store near heat, sparks,
flame, or other ignition sources. Use mechanical ventilation whenever product
is used in a confined space, heated above ambient temperatures, or agitated.
Keep container sealed when not in use.
Contact with Skysol 100 may cause skin irritation. Use chemical-resistant
gloves. In case of skin contact, remove any contaminated clothing and wash
skin thoroughly with soap and water. Wash contaminated clothing before reuse.
Eye contact may cause irritation, tearing, or blurring of vision. Use face shield
or goggles when eye contact may occur. In case of eye contact, flush eyes with
large amounts of water for at least 15 minutes or until irritation subsides.
Inhalation may cause irritation to upper respiratory passages. DO NOT have
food or drink in the vicinity. Failure to comply may result in injury to
personnel.
Clean adhesive remains from all four sides of channel (3) and channel (4) on left van door with
Skysol 100 solvent.
INSTALLATION
1.
Apply adhesive to top, bottom, and side channels (5) and (4) on left van door (1).
2.
Install four new seals (2) on top, bottom, and side channels (3).
3.
Install new seal (5) on channel (4) on left van door (1).
4.
Install ladder (WP 0325 00).
5.
Close van door (TM 9-2320-361-10).
6.
Connect battery ground cable (WP 0126 00).
7.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
2
3
1
5
3
4
2
2
3
END OF WORK PACKAGE
0304 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version