 |
|||
|
|
|||
|
Page Title:
REAR SPLASH GUARD REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0299 00
REAR SPLASH GUARD REPLACEMENT (Contd)
LOWER SPLASH GUARD REMOVAL
Remove four locknuts (9), screws (5), retainer strip (8), and lower splash guard (7) from upper splash
guard (10). Discard locknuts (9).
UPPER SPLASH GUARD REMOVAL
1.
Remove two locknuts (11) and screws (6) from two splash guard braces (12). Discard locknuts (11).
2.
Remove two locknuts (1), screws (4), and splash guard braces (12) from frame (2). Discard
locknuts (1).
3.
Remove two locknuts (13), screws (3), and upper splash guard (10) from frame (2). Discard locknuts
(13).
UPPER SPLASH GUARD INSTALLATION
1.
Install upper splash guard (10) on frame (2) with two screws (3) and new locknuts (13).
2.
Install two splash guard braces (12) on frame (2) with two screws (4) and new locknuts (1).
3.
Install splash guard braces (12) on upper splash guard (10) with two screws (6) and new
locknuts (11).
LOWER SPLASH GUARD INSTALLATION
1.
Align holes in lower splash guard (7) to holes in retainer strip (8).
2.
Install retainer strip (8) and lower splash guard (7) on upper splash guard (10) with four
screws (5) and new locknuts (9).
3.
Connect battery ground cable (WP 0126 00).
4.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
2
~
1
3
13
12
4
5
11
10
9
6
8
7
END OF WORK PACKAGE
0299 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version