Click here to make tpub.com your Home Page

Page Title: FUEL AND WATER TANK BODIES MAINTENANCE - continued
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 9-2320-361-24-2
0298 00
FUEL AND WATER TANK BODIES MAINTENANCE (Contd)
INSTALLATION (Contd)
NOTE
Fuel tank models have two additional sets of body and frame
brackets.
6.
Install four screws (9) in four brackets (2) and brackets (10) with four washers (11) and new
locknuts (12). Tighten locknuts (12) 105145 lb-ft (142197 Nm).
WARNING
Eye protection must be worn when removing or installing
springs under tension. Failure to do so may result in injury to
personnel.
7.
Place four screws (3) in two brackets (1) and brackets (4). Install springs (7) inside springs (8) and
over screws (3) with four washers (6) and new locknuts (5).
NOTE
Fuel tank bracket springs installed height is 6.4 in. (163 mm).
Water tank bracket springs installed height is 6.5 in. (165 mm).
8.
Tighten four locknuts (5) and adjust springs (7) and (8) to height specification.
9.
Install fire extinguishers (M49A2C) (WP 0393 00).
10.
Install water cans and brackets (WP 0232 00).
11.
Install overturn tubes (M49A2C) (WP 0271 00).
12.
Install water tank pump manifold (M50A3) (WP 0279 00).
13.
Install gate valves (WP 0283 00).
14.
Install sump assembly, drain valves, and tubes (M49A2C) (WP 0267 00).
15.
Install filter separator (M49A2C) (WP 0286 00).
16.
Install gallon meter (M49A2C) (WP 0276 00).
17.
Install water tank discharge valve control levers (M50A3) (WP 0290 00).
18.
Install fuel tank discharge valve control levers (WP 0264 00).
19.
Install cable retractor (M49A2C) (WP 0274 00).
20.
Install delivery pump front propeller shaft (WP 0292 00).
21.
Install delivery pump rear propeller shaft (WP 0293 00).
22.
Install fuel tank discharge tubes (M49A2C) (WP 0266 00).
23.
Install fuel tank discharge valves (M49A2C) (WP 0263 00).
24.
Install water tank discharge tubes and valves (M50A3) (WP 0289 00).
25.
Install tank body rear compartment doors (WP 0288 00).
26.
Install exhaust system (M49A2C) (WP 0073 00).
27.
Install exhaust system (M50A3) (WP 0074 00).
28.
Install fuel tank nozzle holder (M49A2C) (WP 0269 00).
29.
Install water tank nozzle holder (M50A3) (WP 0270 00).
30.
Install water tank filler cover (M50A3) (WP 0287 00).
31.
Install fuel tank manhole cover (M49A2C) (WP 0268 00).
0298 00-6

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business