 |
|||
|
|
|||
|
Page Title:
WATER TANK DISCHARGE TUBE, COVER, AND VALVE REPLACEMENT (M50A3) - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0289 00
WATER TANK DISCHARGE TUBE, COVER, AND VALVE REPLACEMENT (M50A3) (Contd)
DISCHARGE TUBE COVER REMOVAL
1.
Remove fifty-two screws (3) from discharge tube cover (2).
2.
Slide discharge tube cover (2) left to access discharge valves (13) and discharge tube (23).
DISCHARGE TUBE REMOVAL
1.
Remove four locknuts (16), two holders (15), U-bolts (14), and cables (17) and (26) from two
discharge valves (13). Discard locknuts (16).
2.
Remove two cables (17) and (26) from two guides (18) and (24).
3.
Remove two nuts (10), screws (7), coupling (8) and gasket (9) from discharge tube (23). Discard
gasket (9).
4.
Remove four locknuts (4), screws (11), ring spacer (6), and gasket (5) from discharge tube (23).
Discard gasket (5) and locknuts (4).
5.
Remove four nuts (19), guides (18) and (24), four screws (22), two couplings (21), two gaskets (20),
and discharge tube (23) from two discharge valves (13). Discard gaskets (20).
DISCHARGE VALVES REMOVAL
NOTE
Both discharge valves are replaced the same way.
Remove six locknuts (25), discharge valve (13), and gasket (12) from bottom of tank (1). Discard
gasket (12) and locknuts (25).
DISCHARGE VALVES INSTALLATION
Install new gasket (12) and discharge valve (13) on bottom of tank (1) with six new locknuts (25).
DISCHARGE TUBE INSTALLATION
1.
Install discharge tube (23) on two discharge valves (13) with two new gaskets (20), two
couplings (21), four screws (22), and four nuts (19).
2.
Install ring spacer (6) on discharge tube (23) with new gasket (5), four screws (11) and new
locknuts (4).
3.
Install new gasket (9) and coupling (8) on discharge tube (23) with two screws (7) and nuts (10).
4.
Install two cables (17) and (26) through guides (18) and (24).
5.
Install two cables (17) and (26) on two discharge valves (13) with two U-bolts (14), holders (15),
and four new locknuts (16).
DISCHARGE TUBE COVER INSTALLATION
1.
Slide discharge tube cover (2) right and cover discharge tube (23) and valves (13).
2.
Install cover (2) with fifty-two screws (3).
3.
Fill water tanks (TM 9-2320-361-10).
4.
Connect battery ground cable (WP 0126 00).
5.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0289 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version