 |
|||
|
|
|||
|
Page Title:
METER OUTLET TUBE REPLACEMENT (M49A2C) - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0282 00
METER OUTLET TUBE REPLACEMENT (M49A2C) (Contd)
WARNING
Diesel fuel is flammable. Do not perform fuel system procedures near open
flames. Injury or death to personnel may result.
Accidental or intentional introduction of liquid contaminants into the
environment is a violation of state, federal, and military regulations. Refer to
Army POL (WP 0001 00) for information concerning storage, use, and disposal
of these liquids. Failure to do so may result in damage to environment and
health of personnel.
NOTE
Use a drain pan to capture any draining fuel. Dispose of fluids in accordance
with local policy and ordinances. Ensure all spills are cleaned up.
REMOVAL
1.
Remove two locknuts (6), screws (8), and gasket (7) from outlet tube (13) and meter (5). Discard
locknuts (6) and gasket (7).
2.
Remove two nuts (15), screws (2), coupling (3), and gasket (14), from meter outlet tube (13) and
fuel hose tube (1). Discard gasket (14).
3.
Remove four locknuts (9), screws (12), plate (11), and grommet (10) from tank body (4). Discard
locknuts (9).
4.
Remove meter outlet tube (13) from tank body (4).
INSTALLATION
1.
Install grommet (10) and plate (11) on tank body (4) with four screws (12) and new locknuts (9).
2.
Install meter outlet tube (13) through hole in tank body (4).
3.
Install new gasket (14) and coupling (3) on meter outlet tube (13) and fuel hose tube (1) with two
screws (2) and nuts (15).
4.
Install meter outlet tube (13) and new gasket (7) on meter (5) with two screws (8) and new
locknuts (6).
5.
Install fuel hose and nozzle (WP 0269 00).
6.
Connect battery ground cable (WP 0126 00).
7.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
15
1
3
2
14
13
4
12
3
11
10
9
13
8
5
7
6
END OF WORK PACKAGE
0282 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version