 |
|||
|
|
|||
|
Page Title:
FRONT AND REAR FUEL TANK DISCHARGE TUBES REPLACEMENT (M49A2C) - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0266 00
FRONT AND REAR FUEL TANK DISHCARGE TUBES REPLACEMENT (M49A2C) (Contd)
REMOVAL
WARNING
Diesel fuel is flammable. Do not perform fuel system procedures
near open flames. Injury or death to personnel may result.
NOTE
Removal and installation of front and rear fuel tank discharge
tubes is the same except for two U-bolts on the rear tube and
three U-bolts on the front tube. This procedure describes
removal and installation of the front tube.
Access to nuts, screws, coupling, and gasket for removal and
installation is through vehicle rear compartment.
1.
Remove two nuts (2), screws (3), coupling (1), and gasket (6) from discharge tube (4) and
manifold (5). Discard gasket (6).
2.
Remove six locknuts (9) and three U-bolts (16) from discharge tube (7) and frame (8). Discard
locknuts (9).
3.
Remove two nuts (15), screws (10), coupling (11), and gasket (13) from discharge tube (7) and
discharge valve (12). Discard gasket (13).
4.
Remove discharge tube (7) from discharge valve (12), manifold (5), and frame (8).
INSTALLATION
1.
Position discharge tube (7) on discharge valve (12).
2.
Install new gasket (6) and discharge tube (7) on manifold (5) with coupling (1), two screws (3), and
nuts (2).
3.
Install new gasket (13) and discharge tube (7) on discharge valve (12) with coupling (1), two
screws (10), and nuts (15).
4.
Install discharge tube (7) on frame (8) with three U-bolts (16) and six new locknuts (9).
5.
Fill fuel tanks (TM 9-2320-361-10) and check for leaks.
6.
Connect battery ground cable (WP 0126 00).
7.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0266 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version