 |
|||
|
|
|||
|
Page Title:
CARGO BODY RACK AND TROOP SEAT MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0253 00
CARGO BODY RACK AND TROOP SEAT MAINTENANCE (Contd)
NOTE
Maintenance procedures for M36A2, M35A2, and M35A2C
cargo body racks are the same. This procedure covers M35A2
and M35A2C.
TROOP SEAT REMOVAL
Remove five cotter pins (4), pins (3), and troop seat (2) from cargo rack (1). Discard cotter pins (4).
CARGO RACK DISASSEMBLY
1.
Remove two locknuts (10), washers (8), clamps (7), washers (8), and screws (9) from cargo rack
slats (5). Discard locknuts (10).
2.
Remove sixteen nuts (12), screws (6), and five bow pockets (11) from two cargo rack slats (5).
TROOP SEAT DISASSEMBLY
1.
Remove five locknuts (13), screws (15), and legs (14) from three channels (18) and two end
channels (20). Discard locknuts (13).
2.
Remove two locknuts (23), screws (16), and hinges (21) from end channels (20). Discard
locknuts (23).
3.
Remove twenty-four nuts (22), screws (19), five hinges (21), two end channels (20), and three
channels (18) from troop seat slats (17).
INSPECTION
1.
Inspect legs (14), channels (18) and (20), and hinges (21) for cracks, bends, and excessive rust.
Replace legs (14), channels (18) and (20), or hinges (21) if cracked, bent, or excessively rusted.
2.
Inspect wood slats (17) and (5) for splinters, warp, and excessive rotting. Replace slats (17) and (5)
if splintered, warped, or excessively rotted.
TROOP SEAT ASSEMBLY
1.
Install two end channels (20), three channels (18), and five hinges (21) on slats (17) with
twenty-four screws (19) and nuts (22).
2.
Install hinges (21) on end channels (20) with two screws (16) and new locknuts (23).
3.
Install leg (14) on three channels (18) and two end channels (20) with five screws (15) and new
locknuts (13).
CARGO RACK ASSEMBLY
1.
Install five bow pockets (11) on two cargo rack slats (5) with sixteen screws (6) and nuts (12).
2.
Install clamps (7) on two cargo rack slats (5) with screws (9), washers (8), and new locknuts (10).
TROOP SEAT INSTALLATION
1.
Install troop seat (2) on cargo rack (1) with five pins (3) and new cotter pins (4).
2.
Install troop seat and side rack (TM 9-2320-361-10).
3.
Connect battery ground cable (WP 0126 00).
4.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0253 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version