 |
|||
|
|
|||
|
Page Title:
PERSONNEL HEATER AIR VENT REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
FIELD MAINTENANCE INSTRUCTIONS
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)
PERSONNEL HEATER AIR VENT REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Applicable Models
Equipment Condition
All
Parking brake set and wheels chocked
(TM 9-2320-361-10).
Materials/Parts
Hood raised and secured (TM 9-2320-361-10).
Four lockwashers (item 225, WP 0470 00)
Battery ground cable disconnected
References
(WP 0126 00).
WP 0249 00
REMOVAL
1.
Loosen clamp (4) and remove supply hose (1) from air vent (9).
2.
Loosen screw (8) and remove cable (5) from shaft (2) and clamp (3).
3.
Remove two nuts (6), lockwashers (7), screws (12), lockwashers (11), and air vent (9) from
firewall (10). Discard lockwashers (7) and (11).
INSTALLATION
1.
Install air vent (9) on firewall (10) with two new lockwashers (11), screws (12), new
lockwashers (7), and nuts (6).
2.
Insert cable (5) through clamp (3) and install on shaft (2) with screw (8).
3.
Install supply hose (1) on air vent (9) with clamp (4). Tighten clamp (4).
4.
Adjust control cable (WP 0249 00).
5.
Connect battery ground cable (WP 0126 00).
6.
Lower and secure hood (TM 9-2320-361-10).
7.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
1
~
12
11
10
2
4
3
9
5
8
7
6
END OF WORK PACKAGE
0248 00-1/2 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version