 |
|||
|
|
|||
|
Page Title:
WINDSHIELD WASHER RESERVOIR, TUBING, JET, AND PUMP REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0239 00
WINDSHIELD WASHER RESERVOIR, TUBING, JET, AND PUMP REPLACEMENT (Contd)
WINDSHIELD WASHER RESERVOIR REMOVAL
1.
Remove cover (17) with grommet (16) from reservoir (19). Remove strainer (18) from hose (7) and
hose (7) from grommet (16) and cover (17).
2.
Remove three locknuts (24), two clamps (23), plate (22), two screws (21), washers (20), and
reservoir (19) from steering column (25). Discard locknuts (24).
WINDSHIELD WASHER TUBING REMOVAL
NOTE
Tag hose and tubes for installation.
1.
Disconnect tubes (4), (6), and (28) from valve (29).
2.
Disconnect hose (7) and tubes (6) and (9) from tee connector (8).
3.
Remove grommet (27) and hose (7) from dash panel (26).
WINDSHIELD WASHER JET REMOVAL
Remove nut (5), washer (2), and jet (3) from cowling (1).
WINDSHIELD WASHER PUMP REMOVAL
Remove locknut (10), washer (11), windshield washer pump (13), washer (14), and screw (15) from
instrument panel (12). Discard locknut (10).
WINDSHIELD WASHER PUMP INSTALLATION
Install windshield washer pump (13) on instrument panel (12) with washer (14), screw (15),
washer (11), and new locknut (10).
WINDSHIELD WASHER JET INSTALLATION
Install washer (2) and jet (3) on cowling (1) with nut (5).
WINDSHIELD WASHER TUBING INSTALLATION
1.
Install grommet (27) and hose (7) on dash panel (26).
2.
Install tubing (28) on jet (3) and install tubing (4) and (9) on pump (13).
3.
Install hose (7) and tubing (9) and (6) on tee connector (8).
4.
Install tubing (4), (6), and (28) on valve (29).
WINDSHIELD WASHER RESERVOIR INSTALLATION
1.
Install two clamps (23) on steering column (25).
2.
Install plate (22) and reservoir (19) on clamps (23) with three screws (21), washers (20), and new
locknuts (24).
3.
Install grommet (16) in cover (17).
4.
Install tube (7) through grommet (16) and connect to strainer (18). Position strainer (18) at bottom
of reservoir (19) and install cover (17) on reservoir (19).
5.
Connect battery ground cable (WP 0126 00).
6.
Lower and secure hood (TM 9-2320-361-10).
7.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0239 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version