 |
|||
|
|
|||
|
Page Title:
DRIVER'S SEAT CUSHION, BACKREST, FRAME, AND SEAT ADJUSTER REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0237 00
DRIVER'S SEAT CUSHION, BACKREST, FRAME, AND SEAT ADJUSTER REPLACEMENT (Contd)
DRIVER'S SEAT CUSHION REMOVAL
Remove four screws (14), lockwashers (15), two seat cushion brackets (16), and washers (13) from seat
cushion (17) and seat frame (3). Remove seat cushion (17) from seat frame (3). Discard lockwashers (15).
DRIVER'S SEAT BACKREST REMOVAL
1.
Remove two screws (6), lockwashers (5), and clips (4) from seat backrest (1) and seat frame (3).
Discard lockwashers (5).
2.
Remove four screws (7), backrest (1), and plate (2) from seat frame (3).
DRIVER'S SEAT FRAME REMOVAL
Remove four locknuts (8) and seat frame (3) from seat adjusters (11). Discard locknuts (8).
DRIVER'S SEAT ADJUSTER REMOVAL
Remove four locknuts (10), two seat adjusters (11), and release wire (12) from seat base (9). Discard
locknuts (10).
DRIVER'S SEAT ADJUSTER INSTALLATION
Install two seat adjusters (11) and wire (12) on seat base (9) with four new locknuts (10).
DRIVER'S SEAT FRAME INSTALLATION
Install seat frame (3) on seat adjusters (11) with four new locknuts (8).
DRIVER'S SEAT BACKREST INSTALLATION
1.
Install plate (2) and backrest (1) on seat frame (3) with four screws (7).
2.
Install two clips (4) on seat frame (3) and backrest (1) with two new lockwashers (5) and
screws (6).
DRIVER'S SEAT CUSHION INSTALLATION
1.
Position two washers (13), seat cushion brackets (16), and seat cushion (17) on frame (3).
2.
Install two seat cushion brackets (16), two washers (13), and seat cushion (17) on seat frame (3)
with four screws (14) and new lockwashers (15).
3.
Connect battery ground cable (WP 0126 00).
4.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0237 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version