 |
|||
|
|
|||
|
Page Title:
GLOVE COMPARTMENT REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0225 00
GLOVE COMPARTMENT REPLACEMENT (Contd)
REMOVAL
1.
Remove two screws (2) and bracket (3) from instrument panel (4).
2.
Remove ten screws (9) and glove compartment (1) from instrument panel (4).
3.
Remove four nuts (5), screws (7), and glove compartment door (6) from instrument panel (4).
NOTE
Perform step 4 if glove compartment door is damaged.
4.
Inspect glove compartment door seal (8). If damaged, clean glove compartment door (6) seal
mounting surface free of seal (8) debris and replace seal (8).
INSTALLATION
NOTE
Perform steps 1 and 2 only if seal was removed.
1.
Apply adhesive to glove compartment door (6) seal mounting surface and mounting side of seal (8).
2.
Install seal (8) on glove compartment door (6).
3.
Install bracket (3) on instrument panel (4) with two screws (2).
4.
Install glove compartment door (6) on instrument panel (4) with four screws (7) and nuts (5).
5.
Install glove compartment (1) on instrument panel (4) with ten screws (9).
6.
Connect battery ground cable (WP 0126 00).
7.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
4
3
2
5
1
6
9
7
8
END OF WORK PACKAGE
0225 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version