 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0221 00
HOOD MAINTENANCE (Contd)
WARNING
Hood is large and heavy. An assistant is required during
removal and installation to prevent injury to personnel.
REMOVAL
1.
Raise hood (9) and remove eight split rivets (13) and two rubber bumpers (12) from hood (9).
Discard split rivets (7).
NOTE
Assistant will help with step 2.
2.
Remove eight screws (1), lockwashers (2), two reinforcements (4), and hood (9) from two hinges (3).
Discard lockwashers (2).
3.
Unlatch windshield holddown fastener (7) from bracket (6).
4.
Remove two locknuts (11), screws (5), and bracket (6) from hood (9). Discard locknuts (11).
5.
Remove two locknuts (11), screws (8), fastener (7) and reinforcement (10) from hood (9). Discard
locknuts (11).
6.
Remove adhesive remains from hood.
REPAIR
1.
Refer to TM 9-237 for welding repair.
2.
Refer to TC 9-510 for metal body repair.
3.
Refer to TB 43-0209 for rustproofing instructions.
INSTALLATION
NOTE
Assistant will help with step 4.
1.
Install windshield holddown fastener (7) on hood (9) wiht two screws (8), reinforcement (10), and
new locknuts (11).
2.
Install bracket (6) on hood (9) with two screws (5) and new locknuts (11).
3.
Latch windshield holddown fastener (7) to bracket (6).
4.
Install hood (9) on two hinges (3) with two reinforcements (4), eight new lockwashers (2), and
screws (1).
5.
Apply adhesive to rubber bumpers (12).
6.
Install two rubber bumpers (12) on hood (9) with eight new split rivets (13).
7.
Install windshield holddown fasteners and brackets (WP 0228 00).
8.
Install hood holddown fasteners and brackets (WP 0220 00).
9.
Connect battery ground cable (WP 0126 00).
10.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0221 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version