 |
|||
|
|
|||
|
Page Title:
STEERING WHEEL REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0196 00
STEERING WHEEL REPLACEMENT (Contd)
REMOVAL
1.
Loosen screw (6) and slide turn control (7) down steering column (8).
NOTE
Perform step 2 only if truck has airbrake hand control lever.
2.
Loosen two screws (5) and slide airbrake hand control lever (4) down steering column (8).
3.
Unscrew nut (2) until it is level with top of shaft (3).
4.
Turn steering wheel (1) to straight-ahead position. Install adapter (10) on steering wheel nut (2),
and adapter (11) on steering column (8).
5.
Position steering puller on adapters (10) and (11), and screw in steering puller screw (9) until
steering wheel (1) pops loose.
6.
Remove steering puller, adapters (10) and (11), nut (2), and steering wheel (1).
INSTALLATION
1.
Place steering wheel (1) on shaft (3) in 10 o'clock, 2 o'clock, and 6 o'clock positions, and tap evenly
on wheel (1) until nut (2) can be installed.
2.
Install nut (2) and tighten.
NOTE
Perform step 3 only if truck has airbrake hand control lever.
3.
Slide airbrake hand control valve (4) up steering column (8) and tighten two screws (5).
4.
Slide turn signal control (7) up steering column (8) and tighten screw (6).
5.
Install horn button (WP 0113 00).
6.
Connect battery ground cable (WP 0126 00).
7.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0196 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version