 |
|||
|
|
|||
|
Page Title:
WHEEL, TIRE, AND TUBE MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0186 00
WHEEL, TIRE, AND TUBE MAINTENANCE (Contd)
WHEEL REMOVAL
WARNING
Completely deflate tires before removing from axles if there is
obvious damage to wheel components. Injury or death to
personnel may result from exploding wheel components.
NOTE
Wheel stud nuts on left side have left-hand threads and must
be turned to the right to loosen them. Wheel stud nuts on
right side have right-hand threads and must be turned to the
left to loosen them. Studs and nuts are stamped (L) left and
(R) right.
Rear and front wheels are maintained the same way. This
procedure covers rear wheels.
1.
Loosen six wheel stud nuts (1) on wheel (2) to be removed.
2.
Raise vehicle with hydraulic jack and place jack stand under axle (6) of wheel (2) to be removed.
3.
Remove six wheel stud nuts (1) from inner-rear wheel (4).
CAUTION
Do not slide wheel on threaded studs. Sliding wheel may
damage threads.
NOTE
Assistant will help with steps 4 and 5.
4.
Remove outer-rear wheel (2) from hub (5).
NOTE
To remove inner wheel, reverse wheel stud nut wrench, remove
handle, and install near large end of wrench.
5.
Remove six wheel cap nuts (3) and inner-rear wheel (4) from hub (5).
6
2
3
1
JACK STAND
6
HYDRAULIC JACK
5
4
0186 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version