 |
|||
|
|
|||
|
Page Title:
AIR COMPRESSOR GOVERNOR MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0183 00
AIR COMPRESSOR GOVERNOR MAINTENANCE (Contd)
CHECK AND ADJUSTMENT
1.
Start engine and buildup air pressure (TM 9-2320-361-10) until gauge (4) reading is steady.
2.
Check air pressure. Gauge (4) should read 85120 psi.
3.
If air pressure gauge (4) reading is correct, stop engine. End of task.
4.
If air pressure gauge (4) reading is too low:
a. Stop engine.
b. Remove cap (3), loosen jamnut (1), and turn screw (2) 1/4 turn counterclockwise.
c. Start engine and buildup air pressure (TM 9-2320-361-10). Check air pressure gauge (4)
reading.
If still low, check for air leaks and repeat step b. until air pressure is correct.
d. Stop engine, tighten jamnut (1) on screw (2), and install cap (3).
5.
If air pressure gauge (4) reading is too high:
a. Stop engine.
b. Remove cap (6) from air valve (5).
c. Turn air valve (5) left and bleed air until gauge (4) reads below 100 psi.
d. Close air valve (5) and replace cap (6).
e. Remove cap (3), loosen jamnut (1), and turn screw (2) 1/4 turn clockwise.
f. Start engine and buildup air pressure. Check air pressure gauge (4) reading. If still high,
repeat steps a. through e. until air pressure is correct.
g. Stop engine, tighten jamnut (1) on screw (2) and install cap (3).
6.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0183 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version