 |
|||
|
|
|||
|
Page Title:
AIR COMPRESSOR AND PULLEY MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0180 00
AIR COMPRESSOR AND PULLEY MAINTENANCE (Contd)
REMOVAL
WARNING
Do not disconnect air lines before draining air reservoirs. Small
parts under pressure may shoot out with high velocity, causing
injury to personnel. Air compressor becomes hot during
operation. Allow compressor to cool before handling, or injury to
personnel may result.
NOTE
Prior to removal, tag all air lines for installations.
Plug air lines as they are disconnected.
1.
Remove air line (7) from adapter (4).
NOTE
On some air compressors, the air governor air line is on front of
compressor near pulley.
2.
Remove air governor air line (2) from elbow (3).
3.
Remove screw (14), clamp (13), and fuel pump return line (1) from air compressor (10). Tie fuel
pump return line (1) out of way.
4.
Install screw (14) in air compressor (10).
5.
Remove screw (5) and bracket (6) from air compressor (10).
6.
Install screw (5) in air compressor (10).
7.
Remove four nuts (8), lockwashers (9), and bracket (15) from base of air compressor (10). Discard
lockwashers (9).
8.
Tie tachometer cable (16) and bracket (15) out of way.
9.
Remove air compressor (10) and gasket (11) from air compressor support (12). Discard gasket (11).
0180 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version