 |
|||
|
|
|||
|
Page Title:
PARKING BRAKESHOE MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0164 00
PARKING BRAKESHOE MAINTENANCE (Contd)
INSTALLATION
1.
Install inner brakeshoe (9), outer brakeshoe (7), and lever (6) on brakedrum (10).
2.
Install spacer(s) (17) and screw (8) on outer brakeshoe (7) and bracket (15) with jamnut (16) until
measurement is 0.0625 in. (1.6 mm) between inside edge of brakedrum (10) and inner
brakeshoe (9). Do not tighten jamnut (16).
3.
Install adjustment screw (5) and jamnut (13) on bracket (14).
4.
Install spring (12) on adjustment screw (5) and outer brakeshoe (7). Tighten jamnut (13).
5.
Install threaded end (1) of brake cable (11) through eye of lever (6) and install nut (2) up to
marked location on threaded end (1).
6.
Install spring (3) on lever (6) and bracket (4).
7.
Operate parking brake handle in cab several times ending in released position.
8.
Make sure outer brakeshoe (7) and lever (6) rotate easily on screw (8) without side-to-side wobble.
Tighten screw (8) as necessary to prevent wobble, and tighten jamnut (16).
0164 00-8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version