 |
|||
|
|
|||
|
Page Title:
REAR SPRING REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0157 00
REAR SPRING REPLACEMENT (Contd)
REMOVAL
NOTE
Left and right rear springs are replaced the same way. This
procedure covers the left side.
1.
Remove four nuts (7), lockwashers (8), two U-bolts (3), and saddle (2) from spring (1). Discard
lockwashers (8).
2.
Remove two bolts (5) and lockwashers (4) from spring seat (9). Discard lockwashers (4).
NOTE
Assistant will help with step 3.
3.
Remove spring (1) from spring seat (9) and rear axles (10) and (6).
INSTALLATION
NOTE
Assistant will help with step 1.
1.
Position and align spring (1) on spring seat (9) and rear axles (6) and (10).
2.
Install two new lockwashers (4) and bolts (5) on spring seat (9). Tighten bolts (5) 280365 lb-ft
(380495 Nm).
3.
Position saddle (2) over spring (1) and center bolt (11). Install two U-bolts (3) with four new
lockwashers (8) and nuts (7). Tighten nuts (7) 190220 lb-ft (258298 Nm).
4.
Install rear spring wear pads (WP 0161 00).
5.
Connect battery ground cable (WP 0126 00).
6.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0157 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version