 |
|||
|
|
|||
|
Page Title:
INTERMEDIATE PROPELLER SHAFT MAINTENANCE (M36A2) - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0140 00
INTERMEDIATE PROPELLER SHAFT MAINTENANCE (M36A2) (Contd)
INSTALLATION
1.
Install frame support (4) to crossmember (6) with four screws (5) and new locknuts (3).
2.
Install flange yoke (25) on studs (1) of transfer flange (27) in parking brake drum (2) with four
new locknuts (26). Ensure scribed marks align. Tighten locknuts (26) 90120 lb-ft (122163 Nm).
3.
Install bearing housing (17) to frame support (4) with two screws (7), washers (15), and new
locknuts (16).
4.
Install deflector (12) and flange (11) on shaft (23) with washer (10) and nut (9).
5.
Tighten nut (9) on shaft (23) 260290 lb-ft (353393 Nm).
6.
Install new cotter pin (8) through nut (9).
7.
Ensure shaft (23) turns freely and with no side play at U-joint (24) and support bearing (19).
8.
Install forward-rear propeller shaft (WP 0139 00).
9.
Lubricate bearing housing (WP 0020 00).
10.
Connect battery ground cable (WP 0126 00).
11.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
5
6
4
3
7
8
2
9
14
1
10
19
11
27
12
13
14
28
15
17
26
16
13
18
20
21
22
23
24
25
END OF WORK PACKAGE
0140 00-5/6 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version