HOT WATER PERSONNEL HEATER BLOWER MOTOR RESISTOR REPLACEMENT

TM 9-2320-361-24-1

0117 00

FIELD MAINTENANCE INSTRUCTIONS

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)

HOT WATER PERSONNEL HEATER BLOWER MOTOR RESISTOR REPLACEMENT

REMOVAL AND INSTALLATION

INITIAL SETUP:

Applicable Models

Equipment Condition

All

Parking brake set and wheels chocked

(TM 9-2320-361-10).

Materials/Parts

Battery ground cable disconnected

Two lockwashers (item 215, WP 0470 00)

REMOVAL

Remove two screws (4), lockwashers (3), and resistor (1) from firewall (2). Discard lockwashers (3).

INSTALLATION

Install resistor (1) on firewall (2) with two new lockwashers (3) and screws (4).

Connect battery ground cable (WP 0126 00).

Turn on hot water heater switch (TM 9-2320-361-10) and check personnel heater operations.

Release parking brake and remove wheel chocks (TM 9-2320-361-10).

END OF WORK PACKAGE

0117 00-1/2 blank