 |
|||
|
|
|||
|
Page Title:
LOW AIR BUZZER REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0110 00
LOW AIR BUZZER REPLACEMENT (Contd)
REMOVAL
1.
Disconnect lead wire (13) from low air buzzer (3).
2.
Remove two nuts (1) and lockwashers (2) from two stud mounts (4). Discard lockwashers (2).
3.
Remove nut (15) and lockwasher (14) from stud mount (11). Discard lockwasher (14).
4.
Bend ground strap (12) outward and remove low air buzzer (3) from two stud mounts (4) and stud
mount (11).
NOTE
Assistant will help with steps 5 and 6.
5.
Remove two nuts (7), lockwashers (6), and mounting studs (4) from firewall (5). Discard
lockwashers (6).
6.
Remove nut (9), lockwasher (8), stud mount (11), ground strap (12), and lockwasher (10) from
firewall (5). Discard lockwashers (8) and (10).
INSTALLATION
NOTE
Assistant will help with steps 1 and 2.
1.
Install stud mount (11) and ground strap (12) on firewall (5) with two new lockwashers (10) and (8)
and nut (9).
2.
Install two stud mounts (4) in firewall (5) with two new lockwashers (6) and nuts (7).
3.
Install low air buzzer (3) on two stud mounts (4) and stud mount (11).
4.
Lift end of ground strap (12) and secure on stud mount (11) with new lockwasher (14) and nut (15).
5.
Install two new lockwashers (2) and nuts (1) on stud mounts (4).
6.
Connect wire (13) to low air buzzer (3).
7.
Connect battery ground cable (WP 0126 00).
8.
Start engine (TM 9-2320-361-10) and check low air buzzer operation.
9.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0110 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version