 |
|||
|
|
|||
|
Page Title:
FUEL LEVEL SENDING UNIT REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0109 00
FUEL LEVEL SENDING UNIT REPLACEMENT (Contd)
WARNING
Diesel fuel is flammable. Do not perform fuel system
procedures near open flames. Injury or death to personnel may
result and/or damage to equipment may result.
REMOVAL
1.
Disconnect lead wire (3) from sending unit (4).
2.
Remove five screws (2) and copper washers (1) from sending unit (4).
3.
Remove sending unit (4) and gasket (5) from fuel tank (6). Discard gasket (5).
INSTALLATION
1.
Install new gasket (5) and sending unit (4) on fuel tank (6) with five copper washers (1) and
screws (2).
2.
Connect lead wire (3) to sending unit (4).
3.
Install fuel tank on M109A3 and M185A3 vehicles (WP 0060 00).
4.
Connect battery ground cable (WP 0126 00).
5.
Start engine (TM 9-2320-361-10) and check fuel gauge for proper operation.
6.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
2
3
1
4
5
6
END OF WORK PACKAGE
0109 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version