 |
|||
|
|
|||
|
Page Title:
TURN SIGNAL CONTROL AND INDICATOR LAMP REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
FIELD MAINTENANCE INSTRUCTIONS
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)
TURN SIGNAL CONTROL AND INDICATOR LAMP REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Applicable Models
Equipment Condition
Parking brake set and wheels chocked
All
(TM 9-2320-361-10).
Battery ground cable disconnected
REMOVAL
1.
Remove cable connector (5) from turn signal control (4).
2.
Remove clamp (2) and turn signal control (4) from steering column (3).
3.
Turn lamp lens (1) 1/2 turn to left and remove from turn signal control (4).
4.
Remove lamp (7) from lamp socket (6).
INSTALLATION
1.
Install lamp (7) in lamp socket (6).
2.
Install lamp lens (1) in turn signal control (4) and rotate 1/2 turn to right.
3.
Install turn signal control (4) on steering column (3) with clamp (2).
4.
Connect cable connector (5) to turn signal control (4).
5.
Connect battery ground cable (WP 0126 00).
6.
Check turn signal control for proper operation (TM 9-2320-361-10).
7.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
1
7
2
6
3
5
4
END OF WORK PACKAGE
0102 00-1/2 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version