 |
|||
|
|
|||
|
Page Title:
FRONT WIRING HARNESS REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0091 00
FRONT WIRING HARNESS REPLACEMENT (Contd)
REMOVAL (Contd)
NOTE
Perform step 25 for all vehicles except M50A3 and M49A2C.
25.
Remove nut (10) and wire (11) from starter terminal (12).
26.
Remove nut (3), washer (4), and wire (5) from relay terminal (6).
27.
Remove nut (9), washer (8), and wire (7) from relay terminal (13).
28.
Disconnect wire (15) from oil pressure sending unit (14).
NOTE
Assistant will help with step 29.
29.
Remove locknut (18), screw (2), and clamp (17) from firewall (1) and wiring harness (16). Discard
locknut (18).
30.
Remove nut (39), lockwasher (38), wire (37), screw (36), and lockwasher (35) from flasher unit (34).
Discard lockwashers (38) and (35).
31.
Remove plug (33) from flasher unit (34).
32.
Disconnect wires (26) and (27) from circuit breaker (25).
33.
Disconnect wires (30), (29), and (28) from beam selector switch (31).
NOTE
Assistant will help with steps 34 and 35.
34.
Remove four locknuts (20), screws (32), and clamps (19) from front wiring harness (16) and
firewall (1). Discard locknuts (20).
35.
Remove two locknuts (24), screws (21), washer (40), clamp (22), and two clamp halves (23) from
firewall (1). Discard locknuts (24).
1
~
18
2
17
3
16
4
5
6
7
8
9
10
15
11
14
13
12
0091 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version