 |
|||
|
|
|||
|
Page Title:
EXHAUST SYSTEM REPLACEMENT (M50A3) - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0074 00
EXHAUST SYSTEM REPLACEMENT (M50A3) (Contd)
REMOVAL (Contd)
10.
Remove locknut (10), screw (2), coupling (3), and gasket (4) from exhaust pipe (1) and Y-pipe (5).
Discard locknut (10) and gasket (4),
11.
Remove locknut (9), screw (6), clamp (7), and Y-pipe (5) from bracket (8). Discard locknut (9).
12.
Remove locknut (17), screw (14), coupling (15), exhaust pipe (1), and gasket (16) from exhaust
pipe (18). Discard locknut (17) and gasket (16).
13.
Remove four nuts (19), lockwashers (20), screws (11), exhaust pipe (18), and gasket (13) from
exhaust manifold (12). Discard lockwashers (20) and gasket (13).
INSTALLATION
1.
Install new gasket (13) and exhaust pipe (18) on exhaust manifold (12) with four screws (11), new
lockwashers (20), and nuts (19).
2.
and new locknut (17).
3.
Install Y-pipe (5) on bracket (8) with clamp (7), screw (6), and new locknut (9). Do not tighten
locknut (9).
4.
Install Y-pipe (5) and new gasket (4) on exhaust pipe (1) with coupling (3), screw (2), and new
locknut (10).
5.
Tighten locknut (9).
5
1
2
3
4
10
9
6
8
7
0074 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version