FUEL INJECTION PUMP REPLACEMENT - continued

TM 9-2320-361-24-1

0069 00

FUEL INJECTION PUMP REPLACEMENT (Contd)

WARNING

Diesel fuel is flammable. Do not perform fuel system

procedures near open flame. Injury to personnel may result.

Accidental or intentional introduction of liquid contaminants

into the environment is a violation of state, federal, and

military regulations. Refer to Army POL (WP 0001 00) for

information concerning storage, use, and disposal of these

liquids. Failure to do so may result in damage to environment

and health of personnel.

CAUTION

Cap or plug all openings immediately after disconnecting lines

and hoses to prevent contamination. Remove caps or plugs

prior to installation. Failure to do so may result in damage to

equipment.

Radiator core is easily damaged. Use care when working near

or handling radiator.

NOTE

Use a drain pan to capture any draining fuel. Dispose of fluids

in accordance with local policy and ordinances. Ensure all

spills are cleaned up.

Prior to removal, tag tubes for installation.

REMOVAL

Remove two nuts (5), lockwashers (4), and screws (1) from adapter plate (6), timing cover (7), and

access cover (2). Discard lockwashers (4).

Remove three nuts (10), lockwashers (9), access cover (2), and gasket (3) from timing studs

cover (8). Discard lockwashers (9) and gasket (3).

Remove gasket (3) residue from timing cover (7) and access cover (2).

0069 00-2