 |
|||
|
|
|||
|
Page Title:
FUEL PUMP (IN-TANK) MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0061 00
FUEL PUMP (IN-TANK) MAINTENANCE (Contd)
DISASSEMBLY
1.
Remove lead seal (9) from stud (32) by cutting wire. Discard lead seal (9).
2.
Remove three nuts (5), lockwashers (4), and terminal cover (3) from plate and bracket (31).
3.
Remove screw (1) and disconnect pump wire (26) from terminal cover (3).
4.
Remove fuse (2) from terminal cover (3).
5.
Remove nut (6), lockwasher (7), fuel pump wire (26), wire retainer (25), and gasket (8) from plate
and bracket (31). Discard lockwasher (7) and gasket (8).
6.
Remove gasket (29) and recessed washer (28) from wire retainer (25). Discard gasket (29).
NOTE
Note location of mounting hardware on plate and bracket for
proper installation.
7.
Remove nut (14), washer (15), screw (13), and clamp (30) from wire retainer (25) and plate and
bracket (31).
8.
Remove pump (24) from clamp assembly (27).
9.
Remove two nuts (14), washers (15), screws (13), and clamp assembly (27) from plate and
bracket (31).
10.
Remove two nuts (22), screws (19), four lockwashers (20), and ground strap (21) from pump (24)
and clamp assembly (27). Discard lockwashers (20).
11.
Remove elbow (10) from plate and bracket (31).
12.
Remove hose assembly (18), nut (17), lockwasher (16), O-ring (12), and fitting (11) from plate and
bracket (31). Discard lockwasher (16) and O-ring (12).
13.
Remove clamp (23) and hose assembly (18) from pump (24).
0061 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version