 |
|||
|
|
|||
|
Page Title:
TURBOCHARGER OIL DRAIN TUBE, HOSE, AND ADAPTER REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0056 00
TURBOCHARGER OIL DRAIN TUBE, HOSE, AND ADAPTER REPLACEMENT (Contd)
REMOVAL
1.
Remove two screws (7) and lockwashers (8) from breather tube (9), oil drain tube (2), and
turbocharger (1). Discard lockwashers (8).
2.
Loosen two clamps (6) and remove oil drain tube (2) and gasket (10) from turbocharger (1) and
hose (4). Discard gasket (10).
3.
Remove hose (4) and two clamps (6) from oil drain adapter (5).
4.
Remove oil drain adapter (5) from engine (3).
INSTALLATION
NOTE
Male pipe threads must be wrapped with antiseize tape before
installation.
1.
Install oil drain adapter (5) on engine (3).
2.
Install hose (4) and two clamps (6) on oil drain adapter (5). Do not tighten clamps (6).
3.
Install oil drain tube (2) on hose (4).
4.
Install new gasket (10), oil drain tube (2), and breather tube (9) on turbocharger (1) with two new
lockwashers (8) and screws (7).
5.
Tighten two clamps (6).
6.
Connect battery ground cable (WP 0126 00).
7.
Lower and secure hood (TM 9-2320-361-10).
8.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
1
2
3
10
9
4
8
6
7
5
END OF WORK PACKAGE
0056 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version