 |
|||
|
|
|||
|
Page Title:
CLUTCH CONTROL LINKAGE MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0047 00
CLUTCH CONTROL LINKAGE MAINTENANCE (Contd)
ADJUSTMENT
1.
Loosen nut (3), pull pin (4) to one side of clevis (5) and remove clevis (5) from remote control
lever (1).
2.
If pedal free travel is less than 1.5 in. (3.8 cm), shorten length of rod (2) by tightening clevis (5) on
rod (2).
3.
If pedal free travel is more than 2 in. (5.1 cm), lengthen rod (2) by loosening clevis (5) on rod (2).
4.
Install clevis (5) on remote control lever (1) with pin (4). Press pin (4) into clevis (5) until head of
pin (4) seats against clevis (5).
5.
Recheck pedal free travel (steps 17 and 18 in Installation) and tighten nut (3).
6.
Connect battery ground cable (WP 0126 00).
7.
Lower and secure hood (TM 9-2320-361-10).
8.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
2
1
3
4
5
END OF WORK PACKAGE
0047 00-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version