 |
|||
|
|
|||
|
Page Title:
OIL DIPSTICK TUBE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0042 00
OIL DIPSTICK TUBE REPLACEMENT (Contd)
REMOVAL
1.
Remove nut (1), lockwasher (7), and screw (3) from bracket (6). Discard lockwasher (7).
2.
Remove dipstick tube (5) from engine (4) and bracket (6).
NOTE
Perform step 3 only if oil dipstick tube bracket needs
replacement.
3.
Remove two nuts (2) and bracket (6) from engine (4).
INSTALLATION
NOTE
Male pipe threads must be wrapped with antiseize tape
before installation.
Perform step 1 only if oil dipstick tube bracket was removed.
1.
Install bracket (6) on engine (4) with two nuts (2).
2.
Insert dipstick tube (5) through bracket (6), and install dipstick tube (5) on engine (4).
3.
Install screw (3), new lockwasher (7), and nut (1) on dipstick tube bracket (6).
4.
Install dipstick (TM 9-2320-361-10).
5.
Connect battery ground cable (WP 0126 00).
6.
Lower and secure hood (TM 9-2320-361-10).
7.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
2
1
3
7
6
4
5
END OF WORK PACKAGE
0042 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version