 |
|||
|
|
|||
|
Page Title:
TAPPET CHAMBER COVER AND GASKET REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0033 00
TAPPET CHAMBER COVER AND GASKET REPLACEMENT (Contd)
REMOVAL
1.
Remove eleven screws (6), washers (5), cover (l), and gasket (2) from three studs (3) and engine
block (4). Discard gasket (2).
2.
Remove all remaining gasket (2) material from cover (1) and engine block (4).
INSTALLATION
1.
Apply a light, even coat of sealing compound on both sides of new gasket (2).
2.
Apply a light coat of thread locking sealing compound on threads of eleven screws (6).
3.
Install new gasket (2) and cover (1) on three studs (3) and engine block (4) with eleven washers (5)
and screws (6).
4.
Install engine oil cooler (WP 0038 00).
5.
Connect battery ground cable (WP 0126 00).
6.
Lower and secure hood (TM 9-2320-361-10).
7.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
3
~
2
1
4
5
6
END OF WORK PACKAGE
0033 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version