Click here to make tpub.com your Home Page

Page Title: SERVICE UPON RECEIPT
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 9-2320-361-24-1
FIELD MAINTENANCE INSTRUCTIONS
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)
SERVICE UPON RECEIPT
GENERAL
Upon receipt of a new, used, or reconditioned vehicle, refer to TM 9-2320-361-10 and perform the
following steps to determine if the vehicle has been properly prepared for service.
NOTE
The operator will assist when performing service-upon-receipt
inspections.
1.
Inspect all assemblies, subassemblies, and accessories to ensure they are in proper working order.
2.
Secure, clean, lubricate, or adjust equipment as indicated in the Preventive Maintenance Checks
and Services (PMCS) (WP 0023 00).
3.
Check all Basic Issue Items (BII) to ensure every item is present, in good condition, and properly
mounted or stowed.
GENERAL INSPECTION AND SERVICING INSTRUCTIONS
Refer to TM 9-2320-361-10 and other WPs in this manual when servicing, inspecting, and lubricating
equipment.
WARNING
Skysol 100 mixture is combustible; DO NOT use or store near
heat, sparks, flame, or other ignition sources. Use mechanical
ventilation whenever product is used in a confined space, heated
above ambient temperatures, or agitated. Keep container sealed
when not in use. Failure to do so may result in injury to
personnel.
Contact with Skysol 100 may cause skin irritation. Use
chemical-resistant gloves. In case of skin contact, remove any
contaminated clothing and wash skin thoroughly with soap and
water. Wash contaminated clothing before reuse. Eye contact
may cause irritation, tearing, or blurring of vision. Use face
shield or goggles when eye contact may occur. In case of eye
contact, flush eyes with large amounts of water for at least 15
minutes or until irritation subsides. Inhalation may cause
irritation to upper respiratory passages. DO NOT have food or
drink in the vicinity. Failure to do so may result in injury to
personnel.
NOTE
If the vehicle was driven to the using organization, the following
steps should have been completed.
1.
Use Skysol 100 to clean all exterior surfaces coated with rust-preventive compounds.
2.
Read Processing and Deprocessing Record of Shipping, Storage, and Issue of Vehicles and Spare
Engines tag (DD Form 1397), and follow all precautions listed. This tag should be attached to
steering wheel, shift column, or battery switch.
0019 00-1

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business