 |
|||
|
|
|||
|
Page Title:
Table 2. STE/ICE-R No-Go Chain Test. |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0018 00
SIMPLIFIED TEST EQUIPMENT FOR INTERNAL COMBUSTION ENGINE--
REPROGRAMMABLE STE/ICE-R NO-GO CHAIN TROUBLESHOOTING (Contd)
Table 2. STE/ICE-R No-Go Chain Test.
INSTALL IN
PLACE OF
SENDING
UNIT
P2
BLUE
TRANSDUCER
STRIPE
TK ITEM 17
TRANSDUCER
P1
CABLE W4
NOTE
Test GO 1 (WP 0017 00) Connections
and Checkout must be performed before
running any other STE/ICE-R test.
OIL PRESSURE HOOKUP
TK
LOW OIL PRESSURE CHECK
NG05
MODE
1
INSTALL TRANSDUCER-DO OFF SET
Stop vehicle engine.
Remove oil pressure sending unit (WP 0106 00).
Install pressure transducer, TK Item 17
(blue stripe), in place of sending unit on engine.
Connect P1 of transducer cable W4 to J2 on Vehicle
TEST NO.
TEST
Test Meter (VTM).
Connect P2 of transducer cable to connector on
01
pressure transducer.
50
01000 PSIG PRESSURE
Install pulse tachometer.
Connect P2 of W4 to VTM J3.
Connect P1 of W4 cable to pulse tachometer.
Dial 50 into TEST SELECT switches.
Press and hold TEST until CAL message appears on
display.
PROMPTING
MESSAGE
Release TEST
Wait for offset value to appear on display.
Release TEST.
Is offset value within limits of 150 to +150?
YES
NO
Proceed to TM 9-4910-571-12&P
for offset fault isolation.
2
Proceed to step 2.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version