Table 3. Error Messages.

TM 9-2320-361-24-1

0016 00

SIMPLIFIED TEST EQUIPMENT FOR INTERNAL COMBUSTION ENGINE--REPROGRAMMABLE

(STE/ICE-R) TROUBLESHOOTING INTRODUCTION (Contd)

NOTE

If any error message not listed below is displayed, return

STE/ICE-R set to field maintenance for repair.

Table 3. Error Messages.

VTM

INTERPRETATION

READOUT

Technician has requested information that the VTM it does not have; for example, if the

E000

technician requests the VID number and it has not yet been entered.

E001

Nonexistent test number has been dialed into TEST SELECT switches.

E002

Required transducer is not connected.

E004

VID number or number of cylinders has not been entered.

E005

Transducer offset test was not performed.

E007*

Conflict between VID number dialed in and the number of cylinders dialed in.

VTM is not receiving required voltage signal for test selected. This error code is related only

E008

to starter and compression balance tests.

E009

Engine is not running at start of test.

E010*

Wrong VID number has been entered.

Throttle control was operated incorrectly during power test, taking too much time to

E011

accelerate or decelerate.

E012

CI pulse tachometer is missing.

E013

Bad data has been taken for the test in progress. Repeat test one time.

E014*

Wrong number of cylinders has been dialed into VTM.

E015*

No longer used. If E015 appears, turn in VTM for update.

E017

Engine is not running, or ignition adapter is broken or not properly connected.

Engine RPM or AC frequency test was terminated automatically to protect VTM.

E018

Termination is only after several minutes of no-signal operation. Most likely, VTM was left

on vehicle and engine stalled.

E020

No first peak was detected by VTM during peak-to-peak voltage test.

VTM cannot calculate results. Current is over current probe's range and VTM did not

E021

sample correct portion of data.

E022

External voltage was detected in circuit tested while measuring resistance.

E023

VTM's constant voltage source is not working.

0016 00-8