 |
|||
|
|
|||
|
Page Title:
Table 1. Heating Systems Troubleshooting Procedures - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0015 00
HEATING SYSTEMS TROUBLESHOOTING (Contd)
Table 1. Heating Systems Troubleshooting Procedures (Contd).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
5. Touch multimeter positive
1. If continuity is present go to test 6.
1. ENGINE MANIFOLD
lead to opposite end of spark
HEATER DOES NOT
2. If continuity is not present, repair
plug cable.
WORK (Contd)
or replace spark plug cable
Test 6. Test continuity of ignition coil.
1. Disconnect both input and
output leads of ignition coil.
2. Set multimeter to RX 1000
scale.
3. Touch multimeter negative
lead to pin B (negative) of
ignition coil.
1. If continuity is present, go to step 5.
4. Touch multimeter positive
2. If continuity is not present, replace
lead to pin A (positive) of
ignition coil (WP 0065 00 or
ignition coil.
5. Test continuity of ignition coil
output.
6. Touch multimeter negative
lead to pin B (negative) of
1. If continuity is present, go to test 7.
ignition coil.
2. If continuity is not present, replace
7. Touch multimeter positive
ignition coil (WP 0065 00 or
lead to contact end at ignition
coil output.
FUEL PUMP
IGNITION COIL
TEST 6
STEPS 3
AND 4
FUEL PUMP
IGNITION COIL
TEST 6
STEPS 6
AND 7
0015 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version