 |
|||
|
|
|||
|
Page Title:
Table 1. Engine Troubleshooting Procedures |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0006 00
MECHANICAL SYSTEMS TROUBLESHOOTING - UNIT (Contd)
Table 1. Engine Troubleshooting Procedures (Contd).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4. Check air induction system for
If air induction system is restricted,
4. ENGINE STOPS DURING
major restrictions.
clean or replace defective components
NORMAL OPERATION
(Contd)
If idle speed is set below
5. Check idle speed (WP 0070 00).
specifications, adjust (WP 0070 00).
1. Check air induction system for
If air induction system is restricted,
5. ENGINE STOPS WHEN
restrictions.
clean or replace defective
ACCELERATOR IS
components (WP 0051 00
RETURNED TO IDLE
POSITION
2. Check idle speed (WP 0070 00).
If idle speed is set below
specifications, adjust (WP 0070 00).
1. Check air cleaner indicator
If red appears at indicator window,
6. ENGINE MISFIRES
(TM 9-2320-361-10).
inspect air intake head for
DURING OPERATION
restrictions. If restrictions are not
present, replace air cleaner element
2. Check for air or water in fuel
Perform WP 0006 00, table 1,
system.
malfunction 2, step 2. Repair or
replace as required.
1. Check air cleaner indicator
If red appears at indicator window,
7. POOR ACCELERATION
(TM 9-2320-361-10).
inspect air intake head for
AND/OR LACK OF
restrictions. If restrictions are not
POWER
present, replace air cleaner element
2. Check air induction system for
If air induction system is restricted,
restrictions.
clean or replace defective
components (WP 0051 00
3. Check fuel system for
Replace restricted or damaged
parts (WP 0060 00).
restrictions.
If defects are evident during check,
4. Check exhaust system for
adjust or replace components
restrictions.
vehicles, refer to WP 0074 00).
5. Inspect accelerator pedal and
Adjust travel on throttle lever
throttle lever for full travel.
6. Check throttle linkage for
If linkage is binding or sticking,
binding and sticking.
replace throttle linkage
7. Check vehicle for dragging
1. Adjust brakes, tire pressure, and
brakes, low tire inflation, or
cargo to proper limits.
cargo load over limit
2. Correct overload condition
(TM 9-2320-361-10).
(TM 9-2320-361-10).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version