SECTION I. Introduction
This manual lists repair parts; special tools; test,
Item procured and stocked for anticipated or
measurement, and diagnostic equipment (TMDE); and
other support equipment required for operation and
performance of direct and general support maintenance of
Item procured and stocked for insurance
the 2 1/2 ton truck.
purpose because essentiality dictates that a
minimum quantity be available in the supply
Item procured and stocked and which
This Repair Parts and Special Tools List is divided
otherwise would be coded PA except that it is
into the following sections:
deteriorative in nature.
Section II. Repair Parts List. A list of repair
Support item, excluding support equipment,
parts authorized for use in the performance of
procured for initial issue or outfitting and
maintenance. The list also includes parts which must be
stocked only for subsequent or additional
removed for replacement of the authorized parts. Parts lists
initial issues or outfittings. Not subject to
are composed of functional groups in ascending numerical
sequence, with the parts in each group listed in figure and
item number sequence. Bulk materials are listed in NSN
Support equipment procured and stocked for
initial issue or outfitting to specified
Section III. Special Tools List. A list of special
maintenance repair activities.
tools, TMDE, and support equipment authorized for the
performance of maintenance at the direct and general
Support equipment which will not be stocked
but which will be centrally procured on
Section IV. National Stock Number and Part
Number Index. A list, in NIIN ascending numerical
Item procured and stocked to provide for
sequence, of all National stock numbers appearing in the
sustained support for the life of the equipment.
listings, followed by a list, in alphanumeric sequence, of all
It is applied to an item peculiar to the
part numbers appearing in the listings. National stock
equipment which, because of probable
number and part numbers are cross-referenced to each
discontinuance or shutdown of production
illustration figure and item number appearance.
facilities, would prove uneconomical to
reproduce at a later time.
3. Explanation of Columns.
An item of a depot overhaul/repair kit and not
following provides an explanation of columns
purchased separately. Depot kit defined as a kit
found in the tabular listings:
that provides items required at the time of
overhaul or repair.
Illustration. This column is divided as follows:
An item of a maintenance kit and not
(1) Figure Number. Indicates the figure
purchased separately. Maintenance kit defined
number of the illustration in which the item is shown.
as a kit that provides an item that can be
replaced at organizational or intermediate levels
(2) Item Number. The number used to
identify each item called out in the illustration.
Item included in both a depot overhaul/repair
Source, Maintenance, and Recoverability Codes
kit and a maintenance kit.
Item to be manufactured or fabricated at
(1) Source Code. Source codes are assigned
to support items to indicate the manner of acquiring
support items for maintenance, repair, or overhaul of end
Item to be manufactured or fabricated at the
items. Source codes are entered in the first and second
positions of the Uniform SMR Code format as follows:
direct support maintenance level.